How does CO from CO2 replace coke in blast furnace operations?

How does CO from CO2 replace coke in blast furnace operations?

Carbon monoxide (CO) produced from CO₂ can replace coke in blast furnace operations by acting as the primary reducing agent that strips oxygen from iron ore, the same chemical function coke has performed for centuries. The key difference is that CO derived from recycled CO₂, when generated using renewable electricity, breaks the fossil dependency at the heart of steelmaking. The sections below unpack the chemistry, the carbon benefits, and the real-world barriers to making this substitution at industrial scale.

Why is coke used as a reducing agent in blast furnaces?

Coke is used in blast furnaces because it serves two simultaneous functions: it provides the intense heat needed to sustain the furnace, and it generates carbon monoxide through partial combustion, the gas that chemically strips oxygen from iron ore to produce metallic iron. No other conventional material has historically combined both roles at the required temperature and volume.

When coke burns in the lower section of a blast furnace, it reacts with the injected hot air to produce carbon monoxide at temperatures exceeding 2,000°C. That CO then rises through the furnace and reacts with iron oxide (Fe₂O₃), reducing it to liquid iron, the process known as ironmaking. Coke also provides the structural rigidity that keeps the furnace bed permeable, allowing gases to flow upward through tonnes of iron ore burden.

This dual role, thermal energy source and CO generator, made coke indispensable for over two centuries. The problem is that producing metallurgical coke from coal is emissions-intensive, and burning it inside the furnace releases large quantities of CO₂. For every tonne of steel produced via the blast furnace route, roughly 1.8 to 2 tonnes of CO₂ are emitted. As carbon pricing under the EU Emissions Trading System (ETS) tightens, the cost of that fossil dependency grows with it.

How does carbon monoxide chemically reduce iron ore?

Carbon monoxide reduces iron ore by donating its carbon atom’s electron affinity to pull oxygen away from iron oxide molecules. When CO contacts iron oxide at high temperatures, the carbon in CO bonds preferentially with the oxygen in the ore, forming CO₂ and releasing metallic iron. This is a thermodynamically favorable reaction above approximately 700°C.

The core reaction can be written as: Fe₂O₃ + 3CO → 2Fe + 3CO₂. In practice, the blast furnace runs a cascade of reduction stages as the iron ore descends through progressively hotter zones. Higher iron oxides (hematite, magnetite) are reduced stepwise to wüstite (FeO) and finally to metallic iron in the hottest zone near the tuyeres. Carbon monoxide is the active reducing species throughout this cascade.

What matters from a substitution standpoint is that the chemistry is agnostic to where the CO originates. Whether CO is generated by burning coke or by splitting CO₂ using a plasma reactor, the molecule that enters the reduction zone is chemically identical. The iron ore does not distinguish between fossil-derived and recycled CO, it reacts the same way. This is the fundamental reason why electrified CO production from CO₂ is a technically credible route to blast furnace decarbonization.

How can CO produced from CO₂ replicate coke’s reducing function?

CO produced from CO₂ can replicate coke’s reducing function directly, because the molecule is identical to the CO coke generates through combustion. When injected into a blast furnace at sufficient volume and purity, recycled CO performs the same iron oxide reduction reactions without requiring any modification to the underlying chemistry or the furnace’s metallurgical process.

The practical pathway works as follows: CO₂-rich off-gases captured from the blast furnace itself, or from other industrial sources on site, are fed into a plasma conversion system. Inside the reactor, renewable electricity drives the dissociation of CO₂ into CO and oxygen. The resulting CO stream is then routed back into the blast furnace as a reducing agent, effectively closing the carbon loop on site.

D-CRBN’s Plasma ARC™ technology demonstrated this at ArcelorMittal Gent, the first steel plant in the world to trial the process. The pilot connected a plasma unit via pipeline to a carbon capture unit processing blast furnace off-gases, and achieved a record-low electricity consumption of 1.1 kWh per kilogram of CO produced. Crucially, the pilot confirmed that impurities naturally present in steelmaking CO₂ streams do not harm the conversion process, which is a significant practical advantage. The system can handle diluted CO₂ streams containing up to 50% nitrogen, meaning it integrates with a wide range of capture configurations without requiring highly purified input gas.

One important distinction from coke is that recycled CO addresses only the chemical reducing function, not the structural role coke plays in keeping the furnace bed permeable. In practice, this means CO injection from CO₂ recycling is deployed alongside, and progressively replacing, coke rather than substituting it entirely in a single step. This staged approach aligns well with the modular CO production model, where capacity can be scaled incrementally without requiring full furnace redesign.

What are the carbon emissions benefits of replacing coke with CO from CO₂?

Replacing coke with CO derived from recycled CO₂ cuts blast furnace emissions by intercepting the carbon cycle at two points: it eliminates the need to mine and process coal into metallurgical coke, and it prevents CO₂ captured from the furnace from being released into the atmosphere. When the electricity powering the plasma conversion comes from renewable sources, the process can achieve a net carbon-negative outcome.

Conventional fossil-based CO production emits a global average of around 2.1 tonnes of CO₂-equivalent per tonne of CO produced. D-CRBN’s plasma process, using renewable electricity and biogenic CO₂ as feedstock, achieves approximately 0.7 tonnes of CO₂-equivalent per tonne of CO, making it carbon-negative overall. The process remains carbon-negative as long as the electricity grid it draws from emits below 0.4 tonnes of CO₂ per MWh, a threshold already met by low-carbon national grids across much of Europe.

For steel producers operating under the EU ETS, this has a direct financial dimension. Each tonne of CO₂ avoided or removed translates into reduced carbon allowance costs. As ETS carbon prices have risen and free allocations to steelmakers are being phased down, the economic incentive to replace coke with low-carbon CO is growing alongside the environmental one. On-site CO₂ recycling also reduces a plant’s Scope 1 emissions directly, which matters for regulatory compliance and for downstream customers with their own decarbonization commitments.

The broader lifecycle benefit is that captured blast furnace gas, which would otherwise be flared or emitted, becomes a circular feedstock. Rather than treating CO₂ as waste requiring storage, the electrified CO₂ recycling approach converts it into a productive input, turning a carbon liability into a supply chain asset.

What industrial barriers exist to adopting CO₂-derived CO in steelmaking?

The main industrial barriers to adopting CO₂-derived CO in steelmaking are capital investment requirements, the need for reliable low-cost renewable electricity, integration complexity with existing plant infrastructure, and the current scale gap between pilot-proven systems and full commercial throughput. None of these barriers are insurmountable, but they require deliberate planning and phased deployment.

Energy cost and availability

Plasma CO₂ conversion is powered entirely by electricity. Its economic viability depends on access to competitively priced renewable electricity, ideally at times of grid surplus, when solar and wind generation exceeds demand and spot prices fall. D-CRBN’s reactor design supports fast on/off switching, which allows it to operate opportunistically around low-cost energy periods. However, steel plants that lack direct access to renewable power purchase agreements or co-located generation will need to factor energy procurement into their business case before committing to large-scale deployment.

Integration and infrastructure requirements

Connecting a plasma conversion unit to an existing blast furnace requires CO₂ capture infrastructure upstream and gas injection infrastructure downstream. Both require engineering investment and site-specific design. The good news is that D-CRBN’s modular systems are designed as plug-and-play additions to existing assets: no write-offs, no furnace redesign. The ArcelorMittal Gent pilot demonstrated that pipeline connection to a capture unit is achievable within an operational major-hazard industrial site, establishing a replicable integration template. For plants that have already invested in carbon capture, the incremental step to CO₂ recycling is substantially smaller.

Scale is the remaining challenge. Moving from pilot volumes to the tens of thousands of tonnes of CO a large blast furnace consumes annually requires multiple modular units deployed in parallel, a straightforward path technically, but one that demands committed capital and a clear regulatory environment. The tightening of ETS carbon prices and the phase-out of free allowances for steelmakers are steadily improving the investment case. Steel producers evaluating this transition can engage directly with D-CRBN to model site-specific deployment scenarios and assess the economics against their current coke and carbon costs.

For industrial operators ready to move beyond fossil feedstocks, electrified CO production from recycled CO₂ offers a proven, scalable, and commercially competitive pathway, one that turns blast furnace emissions from a regulatory burden into a circular raw material.

Related Articles

WRITTEN BY

David Ziegler


DATE

November 16, 2026

THE LATEST IN PLASMA CLIMATE TECH

D-CRBN newsletter

Stay up to date about the latest in decarbonizing tech.