Carbon monoxide produced from CO₂ has direct, high-value applications across several major industries, including steelmaking, chemicals, petrochemicals, and synthetic fuel production. CO is a versatile chemical building block used to manufacture acetic acid, polycarbonates, synthetic fuels, and to reduce iron ore in blast furnaces. As CO₂ recycling technology matures, the range of industries that can source CO from captured emissions rather than fossil feedstocks continues to expand.
The sections below address the most common questions about carbon monoxide applications, how CO from CO₂ compares to conventional sources, and what this means for industrial decarbonization.
Which industries use carbon monoxide as a chemical feedstock?
Carbon monoxide is a critical chemical feedstock in the chemicals, petrochemicals, steelmaking, and synthetic fuels sectors. In the chemicals industry, CO is a core input for producing acetic acid, polycarbonates, and isocyanates. In steelmaking, it serves as a reducing agent in blast furnaces. In synthetic fuel production, CO combined with hydrogen forms syngas, the basis for methanol, Fischer-Tropsch fuels, and other e-fuels.
The breadth of CO demand across heavy industry is often underestimated. In the chemical sector, carbon monoxide participates in carbonylation reactions that produce a wide range of intermediates and end products. Acetic acid, used in everything from food preservation to polymer production, relies on CO as a direct reagent. Polycarbonates, widely used in engineering plastics, are synthesized using CO-derived phosgene chemistry.
In petrochemicals, CO is used both as a process feedstock and as a source of heat when combusted, though electrified production routes are increasingly separating these functions. The steel industry uses CO as a reducing agent to strip oxygen from iron ore, a process that currently depends heavily on coke and coal-derived gases. Replacing or supplementing that CO with a low-carbon source derived from CO₂ recycling directly reduces the carbon intensity of steel production without requiring a complete overhaul of existing blast furnace infrastructure.
Synthetic fuel producers, including those developing sustainable aviation fuel and e-methanol, also depend on CO as a carbon carrier in the syngas molecule. The electrified CO feedstock produced through plasma-based CO₂ conversion can serve all of these end markets, making it a genuinely cross-sectoral resource.
How is carbon monoxide used in synthetic fuel production?
Carbon monoxide is a key component of syngas, the mixture of CO and hydrogen that serves as the primary feedstock for synthetic fuel production. Through processes such as Fischer-Tropsch synthesis and methanol synthesis, syngas is converted into liquid fuels including sustainable aviation fuel, e-methanol, and synthetic diesel. The carbon in CO becomes the carbon backbone of these fuel molecules.
The role of CO in synthetic fuel production is fundamental rather than incidental. Fischer-Tropsch synthesis, for example, reacts CO with hydrogen over a catalyst to produce long-chain hydrocarbons. The ratio of CO to hydrogen in the syngas feed directly determines the product slate, different ratios favor different fuel types. This means that controlling CO output quality and composition is critical for fuel producers targeting specific end products.
Methanol synthesis follows a similar logic: CO and CO₂ react with hydrogen over a copper-based catalyst to produce methanol, which can then be used directly as a fuel, blended into gasoline, or converted into olefins for chemical production. When the CO feedstock originates from CO₂ recycling powered by renewable electricity, the resulting methanol qualifies as a green or electrofuel rather than a fossil-derived product.
This distinction matters commercially. Sustainable aviation fuel producers, maritime fuel suppliers, and chemical companies operating under carbon-intensity regulations need to demonstrate the origin of their carbon inputs. CO sourced from captured CO₂ streams, converted using renewable electricity, provides a verifiable, low-carbon carbon source that fossil-derived CO cannot match. Producers looking to electrify their feedstock supply can integrate CO₂-derived CO directly into existing syngas-to-fuels infrastructure without modifying downstream conversion equipment.
What role does carbon monoxide play in steel manufacturing?
In steel manufacturing, carbon monoxide functions as a chemical reducing agent that removes oxygen from iron ore to produce metallic iron. In a blast furnace, CO reacts with iron oxides at high temperatures, converting them to iron while the CO itself is oxidized to CO₂. This reduction step is the central chemical reaction in conventional ironmaking and currently depends on coke-derived CO from coal.
The steel industry’s dependence on CO as a reducing agent is one of the main reasons it remains one of the most carbon-intensive sectors globally. Coke combustion and the subsequent reduction reactions generate large volumes of CO₂-rich off-gases, which are typically partially recycled within the plant but ultimately vented to the atmosphere. Replacing a portion of the fossil-derived CO in this cycle with CO produced from captured CO₂ creates a genuine carbon loop: emissions from the process become the feedstock for the next production cycle.
This is not a theoretical concept. D-CRBN’s plasma technology was first trialed industrially at a major European steel plant, where the plasma reactor used renewable electricity to split CO₂ captured from blast furnace off-gases. The resulting carbon monoxide was then recycled as a reducing agent back into the steelmaking process. The pilot demonstrated safe operation at a major-hazard industrial site and achieved a record-low electricity consumption of 1.1 kWh per kilogram of CO produced, a result that validates both the technical feasibility and the economic viability of the approach.
For steel producers, this pathway offers a route to reduce coal consumption and cut scope 1 emissions without abandoning blast furnace technology entirely. It also reduces exposure to coke price volatility, which is directly linked to global coal markets and geopolitical supply conditions. Explore D-CRBN’s plasma conversion technology to understand how this integrates into existing steelmaking infrastructure.
How does CO from CO₂ compare to fossil-derived carbon monoxide?
Carbon monoxide produced from CO₂ using renewable electricity is chemically identical to fossil-derived CO but carries a significantly lower carbon footprint. Conventional fossil-based CO production emits approximately 2.1 tonnes of CO₂-equivalent per tonne of CO produced globally. By contrast, CO produced from biogenic CO₂ using renewable electricity can achieve a carbon-negative lifecycle balance of around minus 0.7 tonnes of CO₂-equivalent per tonne of CO produced.
Beyond the environmental profile, the two production routes differ in cost structure, supply security, and regulatory exposure. Fossil-derived CO is produced through steam methane reforming or partial oxidation of hydrocarbons, processes that are mature but inherently tied to natural gas and oil prices. When fossil feedstock prices rise or supply chains are disrupted, CO production costs follow directly. CO₂-derived CO, produced on-site using electricity, decouples feedstock cost from fossil commodity markets.
From a regulatory standpoint, industrial operators in Europe face growing carbon costs through the EU Emissions Trading System. CO produced from captured CO₂ rather than fossil inputs reduces the carbon intensity of downstream products, which directly lowers ETS liability. This is a concrete financial benefit, not merely a sustainability credential.
The technical performance of plasma-based CO₂ conversion also compares favorably to alternative low-carbon CO production routes. D-CRBN’s Plasma ARC™ platform achieves energy consumption of approximately 1,100 kWh per tonne of CO₂ processed, roughly five times more efficient than competing conversion technologies such as the reverse water-gas shift reaction. CAPEX is approximately 50% lower than second-in-class alternatives, and the reactor operates at ambient pressure without rare-earth materials, keeping both capital and operating costs competitive with fossil-derived CO at current energy prices.
What is the difference between carbon monoxide and syngas applications?
Carbon monoxide and syngas are related but distinct industrial gases with different application profiles. Pure CO is used where a specific carbon monoxide molecule is required as a reagent, such as in carbonylation chemistry to produce acetic acid or in iron ore reduction. Syngas is a mixture of CO and hydrogen used where both carbon and hydrogen are needed, primarily in fuel synthesis, methanol production, and ammonia-adjacent chemistry.
The distinction matters for industrial buyers because the two products require different downstream infrastructure and serve different value chains. A chemical plant producing acetic acid via carbonylation needs high-purity CO with a controlled composition. A synthetic fuel producer running a Fischer-Tropsch unit needs syngas with a specific CO-to-hydrogen ratio, typically around 2:1 hydrogen to CO for methanol synthesis. Supplying the wrong product, or a product with the wrong composition, means it cannot enter the downstream process without additional conditioning.
D-CRBN’s plasma platform supports both production routes from the same core reactor design. The CO route takes a CO₂-rich stream and converts it to carbon monoxide using a plasma reactor combined with a solid carbon feed. The syngas route combines CO₂ with biomethane inside the plasma reactor, producing syngas without requiring external hydrogen input, a meaningful advantage given the cost and availability constraints around green hydrogen. Detailed specifications for both outputs are available on the syngas product page and the CO product page.
For industrial operators, the choice between targeting CO or syngas production depends on existing downstream assets, available CO₂ and methane feedstock streams, and target market. Both pathways close the carbon loop by converting captured emissions into marketable chemical building blocks.
Can carbon monoxide from CO₂ replace fossil feedstocks in chemical production?
Yes, carbon monoxide produced from CO₂ can replace fossil-derived CO as a chemical feedstock in existing industrial processes. The CO molecule is chemically identical regardless of its origin, meaning it integrates directly into carbonylation reactions, reduction processes, and syngas-based synthesis routes without requiring modifications to downstream equipment. The substitution is technically straightforward; the challenge has historically been cost and production scale.
Advances in plasma-based CO₂ conversion have addressed the cost barrier more directly than other CCU approaches. Because plasma reactors operate at ambient pressure, avoid rare-earth materials, and can be switched on and off rapidly to exploit low-cost renewable electricity windows, the operating economics are increasingly competitive with fossil-derived CO. When carbon costs are factored in through ETS pricing, the economic case for switching strengthens further.
The scope of replacement is also broader than many chemical producers initially assume. Beyond direct CO substitution in carbonylation chemistry, CO₂-derived CO can serve as a feedstock for producing polycarbonates, isocyanates, and a range of specialty chemicals. When converted to syngas, it opens pathways to methanol, olefins, and synthetic fuels, all currently produced from fossil-based syngas. A wastewater-to-methanol pilot already underway in 2026 demonstrates this full value chain in practice: biogas from sludge digestion is converted to syngas via plasma, and that syngas is then converted to green methanol for use as a chemical feedstock.
For chemical and petrochemical companies evaluating the transition, the modular, plug-and-play nature of D-CRBN’s systems means adoption does not require replacing existing production assets. The plasma unit integrates as an additional feedstock source alongside existing supply, allowing a phased transition rather than a full write-off of current infrastructure. Companies ready to explore on-site CO₂ recycling as a feedstock strategy can get in touch with D-CRBN to assess the right configuration for their specific industrial context.
Related Articles
- What geopolitical benefits does CO2 as feedstock offer to European industry?
- How does CCU technology create new revenue streams for emissions-intensive industries?
- Can CO2 plasma reactors switch on and off with solar and wind energy?
- How does CO2 plasma conversion compare to electrolysis for CO production?
- Why is plasma-based CO2 conversion more efficient than reverse water-gas shift?
- What are the main outputs of a plasma-based CO2 conversion system?
- How does CO2 plasma conversion compare to steam methane reforming?
- What are the main benefits of carbon capture utilisation for industry?